Home > Engine Parts > Engine Preheaters > Rotorwing PreHeat > Pratt & Whitney Engines >

Tanis Heli-Preheat Kit - Pratt & Whitney (MD902)
Tanis Heli-Preheat Kit - Pratt & Whitney (MD902)
Tanis Heli-Preheat Kit - Pratt & Whitney (MD902)
  
Alternative Views:
Heli-Preheat Kit – MD900/MD902

FAA-STC: SR04347CH

Preheat is applied through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. This includes engine reduction gearboxes, attached accessories, main & tail rotor gearboxes, batteries (Standard configs), avionics, cabin, and oil/hydraulic tanks. Power is routed to elements through dedicated wiring assemblies with circuit overload protection. Approved ground power location and mounting is field fabricated. System is self-regulating. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply heat thru one plug. It will provide approximately 1142-watts at a load of 9.9-amps total at 115 volts.
This preheat kit when installed will supply heat thru one plug. It will provide approximately 1142-watts at a load of 5.0-amps total at 230 volts.

* Required Bonding sealant sold separately. Quantity 5, PN: TU02788

* AVF0001 form requested for verification of purchase.
Sale Price: $14,130.00


Product Code: TANIS-R-TA3195

Models

Heli-Preheat Kit - Pratt & Whitney (MD902), 115V (TA3195-1)
Heli-Preheat Kit - Pratt & Whitney (MD902), 230V (TA3195-2)
Tanis Bonding Sealant

5 Tubes of Tanis Bonding Sealant, 1 Oz each (PN: TU02788) [$100.00]

Qty:  
Features Information
 

Share your knowledge of this product. Be the first to write a review »