For Cessna 208 “Caravan” with a PT6a-140(A) engine

Engine preheating is accomplished through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. The pads are surface mounted with a bonding sealant/adhesive. Heated items include, engine accessory/reduction gearboxes, fluids, batteries and attached accessories. Power is routed to the heat elements through a dedicated wiring assembly with power indication and circuit overload protection. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit when installed will supply 555 watts with a 4.8 amp draw at 115 volts.
This preheat kit when installed will supply 555 watts with a 2.4 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 2, PN: TU02788

* AVF0001 form requested for verification of purchase.