Engine Preheat Kit for 6 Cylinder UL Power non-certified engines This preheat kit contains threaded heat elements located in each cylinder assembly, a pad element on engine crankcase, and a pad on the oil sump. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours. This preheat kit is compatible with all engine monitor systems as the threaded heat elements that replace intake bolt fasteners. This preheat kit when installed will supply 360 watts with a 3.1 amp draw at 115 volts.
This preheat kit when installed will supply 360 watts with a 1.6 amp draw at 230 volts. * Required Bonding sealant sold separately. Quantity 1, PN: TAU02788