Non released Engine Preheat Kit for DeltaHawk diesel engine This preheat kit contains threaded heat elements located in cylinder assembly side and in the prop bearing boss (Dedicated locations). Additional one pad heat element is used for the oil tank. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours. This preheat kit when installed will supply 340 watts with a 3.0 amp draw at 115 volts.
This preheat kit when installed will supply 340 watts with a 1.5 amp draw at 230 volts. * Required Bonding sealant sold separately. Quantity 1, PN: TAU02788