The FL-1 and FL-2 are fuel level instruments featuring an LED analog display and a digital display. The FL-1 is for single fuel level while the FL-2 is for dual fuel level. They can display in gallons (one or one-half gallon increments), pounds or liters. Since the FL-1 and FL-2 do not incorporate any moving parts (needles, bearings, springs, etc.), there is little to go wrong or wear out. Instrument improvements allow for a new, easier and quicker fuel calibration procedure. The procedure also removes any non-linearity in the tanks and sensors. You may use as few as two calibration points or as many as nine. A New Programmable Fuel Slosh Stabilization feature has been added to increase user customization.The FL-1 offers pilots an accurate, stable digital fuel level for single tank configurations. Not only does the FL-1 display the tank level digitally, it also provides a 210 degree graphical arc for immediate, quick reference of the tank fuel level.
The FL-1 is not STC'd for installation in a certified aircraft.
9 Calibration Points - The FL-1 allows installers to program from as little as two all the way up to nine fuel level calibration points in the fuel tank. This flexibility eliminates inaccuracies due to non-linear fuel tanks.Easy Programming Interface - The FL-1 is a simple instrument to install and program. Clear step-by-step instructions make programming the instrument easy to calibrate to your fuel tank senders.Selectable Units - The pilot can easily select between displaying fuel level in Liters, Gallons or Lbs with a switch on the front of the instrument panel.
