This system is purchased and installed per engine. It runs off of a 115 volt power source. Contact us for additional information for connecting systems to a single plug location.

Turbine engine preheating is provided through the use of pad heat elements on the engine nose case, and accessory cases. This heats important items like the FCU, bearings and oils.

For operation below freezing, the complete aircraft should be heated by incorporating battery and avionics preheat.

This preheat kit when installed will supply 573 watts with a 5.0 amp draw at 115 volts.
This preheat kit when installed will supply 573 watts with a 2.5 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 2, PN: TU02788

This kit is applicable for M601 and H80 series engines.

FAA TCDS E00048EN:

M601D-11, M601E-11, M601E-11S, M601E-11A, M601E-11AS, M601F, H80, H80-100, H80-200, H75-100, H75-200, H85-100, H85-200.