Engine Preheat Kit for 8 Cylinder; IO-720 series

This preheat kit contains threaded heat elements located in each cylinder assembly, and three pad heat elements (one on the engine crankcase and two oil sump). This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with system power indication and circuit overload protection. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.

This preheat kit is compatible with all engine monitor systems as the threaded heat elements can replace either a rocker cover screw or intake bolt fasteners.

The 8 Cyl/115V preheat kit will supply 810 watts with a 7.0 amp draw at 115 volts.
The 8 Cyl/230V preheat kit will supply 810 watts with a 3.5 amp draw at 230 volts.

* Required Bonding sealant sold separately. Quantity 1, PN: TU02788