Home > Search by Brand > Electronics International >

Electronics International FL-1 Fuel Level Instrument (Not STC'd)
Electronics International FL-1 Fuel Level Instrument (Not STC'd)
Electronics International FL-1 Fuel Level Instrument (Not STC'd)
 

The FL-1 and FL-2 are fuel level instruments featuring an LED analog display and a digital display. The FL-1 is for single fuel level while the FL-2 is for dual fuel level. They can display in gallons (one or one-half gallon increments), pounds or liters. Since the FL-1 and FL-2 do not incorporate any moving parts (needles, bearings, springs, etc.), there is little to go wrong or wear out. Instrument improvements allow for a new, easier and quicker fuel calibration procedure. The procedure also removes any non-linearity in the tanks and sensors. You may use as few as two calibration points or as many as nine. A New Programmable Fuel Slosh Stabilization feature has been added to increase user customization.

The FL-1 offers pilots an accurate, stable digital fuel level for single tank configurations. Not only does the FL-1 display the tank level digitally, it also provides a 210 degree graphical arc for immediate, quick reference of the tank fuel level.

The FL-1 is not STC'd for installation in a certified aircraft.

FL-1CA: This model was designed to be used with EI’s Capacitive Fuel Level Probe (P-300C) from 6” to 20’ long. A P-300C/4 Module must be used for probes 6” to 4’ long.
FL-1RA-12: This model was designed to be used on a 12-volt system with a resistive fuel level sensor. The fuel level sensor’s resistance may increase or decrease as fuel is added to the tank and the maximum resistance must be between 90 and 270 ohms.
FL-1RA-24: This model was designed to be used on a 24-volt system with a resistive fuel level sensor. The fuel level sensor’s resistance may increase or decrease as fuel is added to the tank and the maximum resistance must be between 90 and 270 ohms.

Kit Includes:
Instrument, Wire Harness, and Installation & Operating Instructions.
(No Probes Included - Will be Additional Cost)

Sale Price: $515.00


Product Code: EI-FL-1

Models

FL-1CA (used w/ P-300C probe from 6" - 20' long)(a P-300C/4 module must be used for probes 6" - 4')
FL-1RA-12 (used on a 12V system w/ a resistive fuel level sensor)
FL-1RA-24 (used on a 24V system w/ a resistive fuel level sensor)
Special Instructions


Aircraft Make and Model



Qty:  
Features Technical Specs
 

Share your knowledge of this product. Be the first to write a review »