Home > Engine Parts > Exhaust Systems > Cessna Power Flow >

Cessna 170 Aircraft Exhaust Power Flow Systems
Cessna Power Flow Aircraft Exhaust
Cessna Power Flow Aircraft Exhaust
 
Alternative Views:


Please email [email protected] for pricing on Power Flow products. Prices fluctuate too frequently to remain current. Include registration number and engine make and model.

Bolt-on a Power Flow Tuned Exhaust System and give your airplane that shot of extra oomph that you know it needs. See it, Hear it, Feel it, Try it - we give you a full 60 Day Money Back Guarantee. This boost of power will have you flying higher, faster, and on less fuel in no time, with only one side effect: a chronic & infectious ear-to-ear grin.
The Power Flow Tuned Exhaust System is not just a replacement - it is a vast improvement over the stock Cessna 170 exhaust system.
The concept is simple, out with the old exhaust gases, in with the new fuel-air charge. By more effectively emptying each cylinder of spent exhaust gases, Power Flow gives your Cessna a number of significant benefits:
You will immediately notice an increase in RPM (30-130 more) as well as a significant improvement in rate of climb (100 - 300 fpm).
You are in control: Want to save fuel? You can use less throttle to fly at your current cruise speeds and save up to 2.2 gallons per hour. For more power, use the extra RPM (100 RPM yields approximately five extra knots of airspeed).
The Power Flow is a versatile, quality constructed, complete replacement of the entire exhaust system for your Cessna 170. A new Cabin and Carburetor Heat shroud (utilizing your current SCAT tube hook-ups) is included. The entire system is constructed from 321 stainless steel and includes minimal structural welds in the cabin heat section for improved safety.
All necessary parts are included for easy installation, usually requiring just 3 - 5 hours. The system can be installed by one of our Authorized Dealers, by your local A&P, or you can fly to us for the installation. Fly in with a standard Cessna 170, fly out (usually the same day) tuned for maximum performance and efficiency.
Each exhaust system includes an unconditional 60 day (from time of installation) money back guarantee. If you are not totally satisfied, for any reason, you can return the system for a full refund of your purchase price (Refer to Shipping/Return policy for details).
Visit Blue Skies Aviation, a PowerFlow Systems Risk Free Guarantee Installation Center.

Download the
Installation Manual


Product Code: PFS-CESSNA-170
Email For Pricing

Features Information
 
Features
  • 30 to 130 RPM increase on static run-up
  • 4 to 6 second reduction in takeoff roll
  • 125 to 300 feet per minute (fpm) increase in climb rate
  • 1.2 to 2.2 gallon per hour (gph) reduction in fuel burn
  • Cylinder Head Temperature (CHT) extremes reduced between cylinders and overall temperatures reduced
  • Exhaust Gas Temperature (EGT) extremes reduced between cylinders
  • Smoother running engine
  • Fully FAA STC'd tuned exhaust system manufactured under an FAA/PMA
  • Kit includes a complete 321 Stainless Steel Exhaust System, i.e... 4 headers, cabin heat shroud, carburetor heat, extractor system, muffler, support rod, STC, instructions, including all necessary hardware for installation (nuts, No-blo gaskets, etc.)
  • New & Improved design for Cabin heat and Carb heat exchangers; significantly more durable than the stock exchangers.
  • No welds in cabin heat area practically eliminating the possibility of Carbon Monoxide poisoning
  • Generally within 2 decibels of the original exhaust
  • Easy installation in only 4-6 hours for classic systems (3-5 hours for short stacks); little or no modification to aircraft required (1.5 inch hole in cowling required for support rod on 1972 or later model 172s. Template provided with kit)
  • 60 Day Money Back Guarantee from day of installation
  • 1 year or 500 tach hour (whichever comes first) warranty

Share your knowledge of this product. Be the first to write a review »