The Eagle AOA kit is a highly visible, full color display and comes complete with interface computer, prewired cable/connector harnesses, tubing, cut to fit AOA probe mounting plate, hardware, and mounting brackets for installation in any aircraft. Our systems are designed for simple installation and pilot flown calibration for real time, instantaneous full-scale AOA range.

The Eagle display is a chevron style display. With the chevron display, when you come in for a landing you want to fly to the blue donut (on speed for landing). Should you come in with too low of an angle of attack, the yellow chevron will light up and tell you to put your nose up. Should you come in with too high of an angle of attack, the red chevron will light up and tell you nose down.
- The above dash HUD caters to pilots that don’t have room under the glare-shield. The display and switch panel are inside the dome that sits on top of the glare-shield. Intended for placement directly in front of the pilot. Allows for instantaneous viewing of AOA information exactly where needed. The Above Dash HUD kit sits on top of the Eagle display, showing the display segments in the HUD glass.
- The flush mount HUD is for pilots that want a lower profile HUD on top of their glare-shield. The switch panel must be mounted in the instrument panel. Intended for placement directly in front of the pilot. Allows for instantaneous viewing of AOA information exactly where needed. The Flush Mount HUD kit sits on top of the Eagle display, showing the display segments in the HUD glass.

• Instantaneous Angle of Attack indication.
• Additional indication segments.
• Three point calibration process, programmed on remote switch panel, to aircraft specific lift curve.
• 16 different LED brightness levels from ultra dim to very bright.
• Display has an imbedded photocell for daytime/nighttime brightness settings, choice of which is programmed at the display.
• Audio output, tied to existing audio input on audio panel by others.
• 4 different audio options to choose from which is programmed by the end user at the remote switch panel.
• Audio mute switch with amber LED indicator located on remote switch panel.
• 12-28 VDC input draws less than 0.250 Amps at full brightness.

• Used with the above dash mount or with the flush mount HUD for the Eagle
• This universal kit can be used with pilot or co-pilot side.
• Intended for placement directly within the pilot's peripheral vision.
• Allows for instantaneous viewing of AOA information exactly where needed.
• This kit helps customers who want the above dash or flush mount HUD and have very sloped glare shields.